Filter
Top Products
22 E-3200 User’s Guide
Using Suspend Mode
Suspend, available in Windows 95, is a power management feature that lets
you leave your computer on in a power-saving mode. When your computer
is in Suspend, it appears to be off. However, it continues to receive incoming
faxes and perform automatic tasks you have scheduled. When you exit
Suspend, the computer returns to the state it was in without going through
the normal startup routine.
1.
Save and close any open files to prevent data loss in the event of a
power failure.
2.
Click Start, and then click Suspend on the Start menu.
3.
The power LED turns amber and the monitor becomes dark,
indicating that the computer has entered Suspend mode.
1.
Press any key on the keyboard or move the mouse.
2.
The power LED turns green, and your computer returns to the state it
was in before it entered Suspend. However, if your system is part of a
Novell network, putting your computer in Suspend disconnects you
from your network connection. To reestablish your network
connection:
A.
Click Start and then click Shut Down.
B.
From the
Shutdown Windows options, select Close all programs and log
on as a different use
r
. Selecting that option bypasses the restart
process and displays your network logon dialog box.
C.
Enter your password and click OK. Your logon script runs and your
network connections are reestablished.
To put your system into Suspend
To take your system out of Suspend
Important!
If your system is part of a
Microsoft network, putting
your computer in sleep
mode does not disconnect
you from your network
connection.
Important!
If you have a Novell
network and you put your
system in Suspend mode, it
will disconnect from the
network.