Gateway G200 Network Router User Manual


 
Chapter 2: Unit Installation
HTTPS (e.g. https://[IP]) must be used. If you do not connect using
HTTPS, a browser error will be displayed.
Network Mask - If Obtain an IP Address via DHCP is disabled,
specify the network mask for the Gateway Series appliance.
Gateway Address - If Obtain an IP Address via DHCP is disabled,
specify the gateway address for the Gateway Series appliance. The
gateway address is usually the address of the router on the network.
Static Routes - This option can be used to force the Gateway Series
appliance to use a specific gateway interface to reach specific net-
works or group of networks.
VLAN Networks Enabled - If enabled, this option allows you to
define a VLAN interface to be associated with the physical interface.
For each VLAN, you may select the VLAN ID and IP for the VLAN
either statically or via DHCP. Each VLAN has all the capabilities
available for untagged interfaces. There can be 2 VLANs configured
for each physical interface.
Digium, Inc. Page 44