Filter
Top Products
6
Connected appears on the icon of the wireless network in the wireless network list,
which indicates that your computer is connected to the HG256s through wireless
connection.
Setting Up a Wireless Connection by the WPS button
If the wireless network adapter on your computer can support the WPS function, you
can connect your computer to the HG256s wirelessly as follows:
Step 1
Set the network connection of your PC and ensure that your
PC obtains an IP
address automatically.
By default, the DHCP function of the HG256s is enabled. In this case, the
HG256s assigns an IP address to your PC automatically and you do not need
to configure the IP address of your PC.
Step 2
In the address bar of the Internet Explorer, enter
http://192.168.1.1
, and then
press
Enter
.