Gateway MG1-1000 Switch User Manual


 
LED Indicators
Table 2 - LED Indicators
Designator Name Condition Status
On
The Ethernet Port
has established a
valid network
connection
DS1 Link (green)
Off
Network
connection does
not exist, or bad
cable.
DS2 Activity (green) Flashing
The Ethernet Port
is transmitting or
receiving traffic
DS3 Heartbeat (green) Flashing (1 sec rate)
Gateway is alive
and running
On
The MicroGate is
receiving power
DS4 Power (green)
Off
The MicroGate is
not receiving
power
Power Connectors Pin Assignment
Table 3 - J3 Power Connector
Pin
Number
Name Description
1 GND Signal/Power Ground
2 +5V +5V power (must be regulated +/-5%)
3 +5V +5V power (must be regulated +/-5%)
4 GND Signal/Power Ground
Table 4 - Flying Leads Power Connector (Special Order)
Designator Name Description
E1 GND Signal/Power Ground
E2 +5V +5V power (must be regulated +/-5%)
MicroGate™ User Manual 8