Filter
Top Products
Using Your VX760/VX765 Monitor www.gateway.com
2
Setting up the monitor
Read all instructions before using the monitor and save them for later use.
Follow all warnings and instructions marked on the product.
To set up the monitor:
■ Attach the base
■ Connect the video and power cables
To attach the base:
1 Carefully set the monitor on its side.
2 Hold the base with the tab facing the back of the monitor and align the
hooks on the base with the corresponding slots on the bottom of the
monitor.
3 Slide the base toward the front of the monitor so all hooks are securely in
place. A retaining latch built into the base clicks into place when the base
is correctly attached.
4 Carefully set the monitor upright and place it on a sturdy, level surface.
To connect the video and power cables:
1 Position the monitor and your computer so you can easily get at the back
panel of each. Make sure that all power cables can reach a correctly
grounded electrical outlet.
2 Connect the video cable to the matching (blue) video port on the back of
your computer.
3 Tighten the screws on the video cable connector to keep it from coming
loose. Tightening the screws also prevents radio and TV interference.