Filter
Top Products
Safety
F-60+ Operation and Maintenance Manual
1-2
© GBC Pro-Tech 1999 April
Figure 1-2: Resetting the Laminator
Figure 1-3: Power Lockout
Despite the safety features built into the F-60+ Lamina-
tor, extreme caution must be used when operating or
servicing the unit.
READ THE FOLLOWING
WARNINGS AND CAUTIONS BEFORE
ATTEMPTING TO OPERATE OR SERVICE THE
F-60+ LAMINATOR.
WARNING
WARNING
WARNING
DANGER
WARNING
WARNING
POWER
Reset Button
P
O
W
E
R
Insert
Lock
Circuit
Breakers
Secured in
"Off" Position
Never place fingers or arms between the rolls
when they are turning or when the rolls are in the
closed position. You can be crushed or burned.
Do not wear ties, loose fitting clothing or
dangling jewelry while operating or servicing the
laminator. These items can get caught in the nip
and choke you or you can be crushed or burned.
Do not operate the laminator near water. You can
be severely shocked, electrocuted or cause a fire.
Remove and lock out power from the laminator
before servicing. You can be severely shocked,
electrocuted or cause a fire.
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on the
laminator. You can be severely shocked,
electrocuted or cause a fire. Use only a damp
cloth for cleaning.
Exercise care when cleaning the rolls with 80%
isopropyl alcohol:
•
Use only in a well ventilated area.
•
Wear rubber gloves.
•
Use only on cool rolls.
Cleaning heated rolls can ignite the fumes.