Filter
Top Products
g
GE
OPM_SGS_USM_10K_40K_0US_V010.doc 33/88 Operating Manual
SG Series
10, 20, 30 & 40 kVA
3. Telephone numbers
Tel1:
Tel1 enabled: N
Tel2:
Tel2 enabled: N
metering
alarms
parameters
+
–
ok
Tel1 This parameter specifies a first telephone number to be used for modem
dial-out.
The telephone number has a maximum 39 characters and cannot contain
blanks.
If the desired number is shorter than 39 characters, the string will finish with
blanks.
Tel1 enabled
This parameter
Y/N
specifies if the
first
telephone number will be used for
dial-out.
Tel2 A second dial-out number.
Tel2 enabled This parameter Y/N specifies if the second telephone number will be used
for dial-out.
Tel3 A third dial-out number.
Tel3 enabled This parameter Y/N specifies if the third telephone number will be used for
dial-out.
Tel4
A
fourth
dial-out number.
Tel4 enabled
This parameter
Y/N
specifies if the
fourth
telephone number will be used
for dial-out.
4. LCD Display
LCD Display
UPS NAME: Signature
Contrast = 9
Language = ENGLISH
metering
alarms
parameters
+
–
ok
UPS Name The user can choose the name of the UPS model shown on the main page
(max. 7 characters).
LCD Contrast This parameter controls the contrast of the LCD screen in ten steps.
It can be adapted depending on the room lighting.
LCD Language This parameter allows the choice of language used to display the
information.
Valid choices are English, German, Italian, Spanish, French, Finnish,
Tschech, Slovak, Polish
and
Portuguese
.