GE BC5008 Personal Computer User Manual


 
GFK-2023C 7-1
Driver Installation
Intelligence Panel PCs are shipped from the factory with the Windows operating system
pre-installed. Depending on the product purchased, CIMPLICITY software is also
preinstalled. For configurations where no operating system is installed or the operating
system needs to be re-installed, you must perform a complete installation procedure and
set up all necessary drivers. The original CDs and a Softkeyboard floppy disk are supplied
with the unit.
Note: During installation it is recommended that you connect a PS/2 mouse to the
mouse port because the TouchScreen is not yet usable. This simplifies the
process of initial installation of the operating system. The mouse can be removed
later without an error message.
Network Adapter Driver Installation
Caution
To install the driver for the network card, the installation files from
the CD "SBC Drivers, Utilities & User Manuals" (file path:
CD:\SBC8260\DRIVER\LAN\WINNT) must be copied to the main
directory of a floppy disk.
To install the integrated network port for Windows NT:
1. Plug the network cable (TP) into the IPC and connect to the network.
2. Switch on the PC and begin installation of Windows NT 4.0.
3. Confirm the Create Connection Between Computer and Network and Connect Directly
to the Network messages.
4. Click the Select From List option and select Floppy disk.
5. Confirm the displayed path A:\ with OK.
6. In the next window select the following driver (card) and confirm with OK:
RTL8139 (A/B/C/8130) PCI Fast Ethernet Adapter.
7
Chapter