Filter
Top Products
User’s Manual 76
Manageable 8/9-Port Switch
Step 1: IP & RIP Settings
Click IP & RIP Settings to access IP and RIP settings.
A list of VLAN Ids appears, along with their corresponding IP address and subnet mask.
Step 2:
In the VLAN ID column, click a VLAN ID whose settings you want to view and/or change.
Step 3:
To change the IP Address, click in the text box and type a new address.
Alternatively, you can use the
Delete IP button to delete the IP address.
Caution:
Step 4:
To change the IP Subnet Mask, click in the text box and type a new address.
Step 5:
To change the Frame Type, click a value from the drop-down list.
Step 6:
To change the BOOTP selection, click a value from the drop-down list.
Step 7:
To change the Proxy ARP selection, click a value from the drop-down list.
Step 8:
To change the RIP Setting, click a value from the drop-down list.
Step 9:
Specify whether you want to broadcast, multicast, or neither from the dr
op-down list.
Step 10:
Specify whether you want to advertise routes.
Step 11:
Specify whether you want to advertise the default route.
Step 12:
Specify whether you want to accept RIP V1/V2 updates.
Step 13:
Specify whether you want to accept default route updates.
Click to close the confirmation window.
* No precautionary message appears before you delete the IP
address.
* Be sure you want to delete it before doing so.
*The IP address is not deleted until youclick Update Setting.