Filter
Top Products
Selecting the Frequency Channel
The RF-Mouse operates on two frequency channels. To
prevent interference when using two RF Mice in close
proximity a different frequency channel should be used
for each mouse. Refer to the following to change the fre-
quency channel for your mouse:
1. Set the frequency channel on the receiver to 1 or 2.
2. Set the frequency channel on the mouse to 1 or 2. (The frequen-
cy channel for mouse and receiver must be the same.)
Inserting the Batteries
The RF-Mouse uses two AAA batteries. For best per-
formance, use only alkaline batteries. Refer to the fol-
lowing to insert the batteries:
1. Press the up cover and move backward as shown
here and remove the cover.
2. Insert the two AAA batteries. (The correct polarity is
indicated on the battery compartment casing.)
3. Replace the cover.
Checking the Batteries Power
To check the battery power, right-click the mouse icon
in the Taskbar. Choose the "Check RF-Mouse Status"
option to display the RF-Mouse Status window. The cur-
rent battery percentage charge is shown.
Installing the Mouse Software
Before you can take advantage of the many features your
mouse offers, you must install the driver. The driver is on
the installation diskette that came packaged with your
mouse.
2
97872 Instructions.quark 2/26/02 1:25 PM Page 4