Filter
Top Products
13
Installation Instructions
Installing the Metal
Bottom Trim
IMPORTANT: If this unit is ever
removed from the cabinet or the oven
is ever pulled out for service, the trim
must be removed first or damage to
the trim will occur.
C4
a. Place the bottom trim between the side
trim and against the bottom of the cutout.
b. Using two trim screws provided, secure
the bottom trim to the bottom edge of the
cabinet.
Installing the Oven
Rack Supports and
Oven Racks
C3
Oven Rack Supports
Place the rack support with the slotted
holes over the rear bolts and the round holes
over the front bolts. Using an adjustable
wrench, lightly secure with four nuts but
do not overtighten or the enamel could be
chipped. Repeat for the second rack support.
Slotted
holes over
rear bolts
Round
holes over
front bolts
Oven Racks
a. Place the rear rack locks over and onto
the rack supports (five rack positions are
available, including the top position).
b. Slide the rack all the way in until the rear
rack locks are secure on the rear rack
supports, and press the front rack locks
onto the front rack supports.
Slide the rack
all the way in
and push
down to lock
the front rack
locks onto the
front rack
supports