Filter
Top Products
6
SENDER UNIT PANEL DESCRIPTIONS
12V DC Power Input11
Connect the included 12V DC power supply to this input. The Power LED will
become active when the 12V DC power supply has been properly connected to
the unit and an open wall power socket.
Analog Stereo Audio Input12
This input will accept analog stereo audio from one pair or RCA audio cables.
This input corresponds to LED labeled Audio on the front panel.
S/PDIF Digital Audio Input13
This input will accept digital audio from a S/PDIF (coaxial) audio cable. This
input corresponds to LED labeled Coax on the front panel.
Optic Digital Audio Input14
This input will accept digital audio from a TOSLINK (optical) audio cable. This
input corresponds to LED labeled Optical on the front panel.
RS-232 Serial Communications Input15
This port is capable of 2-way serial communication between RS-232 devices
connected to the sender and receiver. This port can be connected to a
computers serial communications port for interaction with a RS-232 serial
communications device connected to the receiver.
DVI Input16
This input will accept a DVI or HDMI (with a HDMI to DVI adapter/cable) source
device.
Fiber Optic Input A17
This connector accepts a pair of LC terminated fi ber optic cable that will link the
sending and receiving unit together. When the cables between this port and the
corresponding ports on the receiver are properly connected, the LED indicator
labeled Optic A on the front panel of both units will become active.
Fiber Optic Input B18
This connector accepts a pair of LC terminated fi ber optic cable that will link the
sending and receiving unit together. When the cables between this port and the
corresponding ports on the receiver are properly connected, the LED indicator
labeled Optic B on the front panel of both units will become active.