Filter
Top Products
13
RS-232 SERIAL CONTROL INTERFACE
What features are available via the RS-232 serial communications port?
The 4x1 DVI DL Switcher can accept commands through the RS-232 serial
communications port located on the rear panel. The current RS-232 control
features are the ability to switch/route inputs to outputs without the RMT-4IR
remote control.
How do I use these features?
These features were initially intended for utilization by custom installers in
automated setups. However, these features can be tested by using any Windows
PC with a terminal emulation program. The next few pages will show you how.
What pins are used for communication with the 4x1 DVI DL Switcher?
Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication.
A null-modem adapter should not be used with this Switcher.
54321
9876
12345
6789
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface
What are the RS-232 communications port settings?
Bits per second ............................................................................................ 19200
Data bits ............................................................................................................... 8
Parity ............................................................................................................. None
Stop bits ................................................................................................................1
Flow Control .................................................................................................. None