Filter
Top Products
6
CONNECTING AND OPERATING THE 8X1 DVI DL/SL
How to Connect the 8x1 DVI DL/SL Switcher to your devices:
Connect the supplied DVI cables from the DVI sources into the 8x1 DVI 1.
Switcher’s Inputs.
Connect the cable from your display (monitor or projector) into the DVI Out 2.
of the 8x1 DVI DL/SL Switcher.
Connect the included 5V power supply, then plug it into the wall.3.
How to Operate the 8x1 DVI DL/SL Switcher:
Turn on the DVI display or projector fi rst, then the video sources.1.
Turn on the 8x1 DVI DL/SL Switcher by screwing its 5V DC power supply tip 2.
into the receptacle in the rear of the chassis.
Use the RMT-8IR remote control to remotely switch between DVI video 3.
sources.
Alternatively, use a RS-232 control system.4.