Filter
Top Products
11
Buttons 1 through 8 on the RMT-16 IR remote control correspond to display outputs
A through H. Buttons 9 through 16 correspond to source inputs 1 through 8. Please
use the steps and chart below for instructions on how to route video sources to
displays.
Output Input
Remote Button Display Remote Button Source
1A91
2 B 10 2
3C113
4 D 12 4
5 E 13 5
6 F 14 6
7 G 15 7
8 H 16 8
Routing video to a particular display using the remote control is a 2 step process.
The fi rst input step is to select the display (Output column). The second input step is
to select the source (Input column) that will be routed to the display that was chosen
in the fi rst step. The example below shows how to route input source number 7 to
display C.
Press the remote button labeled 4 (display) on the RMT-16 IR remote control.1.
Press the remote button labeled 15 (source) on the RMT-16 IR remote control.2.
The video from DVI Input 7 should now appear on the display connected to 3.
monitor output C.
Repeat these steps to route any video source to any display.
8
on the RMT-
16
IR remote control correspond
n
s
9
throu
g
h
16
correspond to source inputs
1
t
c
hart below
f
or instructions on how to route vid
e
8X8 DVI MATRIX REMOTE DESCRIPTION & OPERATION