Filter
Top Products
12
DL (DUAL LINK) ONLY MODES
DL (Dual Link) Only Modes
The 8-position DIP switch bank located on the underside of the 4x1 DVI KVM DL/
SL Switcher can be used to set each individual input to work in a Dual Link Only
mode. These modes should only be enabled if issues occur when using Dual
Link sources and displays in the default mode.
DIP SWITCH Function DIP SWITCH Function
1 Input 1 Mode 5 N/A
2 Input 2 Mode 6 N/A
3 Input 3 Mode 7 N/A
4 Input 4 Mode 8 N/A
DL (Dual Link) and SL (Single Link) Mode (Switch=OFF) DEFAULT
• This setting can be set individually for each input. This mode will allow
the connection of both Dual Link and Single Link displays.
DL (Dual Link) Only Mode (Switch=ON)
• This setting can be set individually for each input. This mode should be
enabled if issues with the default occur with Dual Link displays.