Filter
Top Products
2
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 2X4 SWITCHER FOR HDMI 1.3
• By default, display information from the display connected to HDMI output port
1 is sent back to the source. Therefore, the other display connected to the 2x4
Switcher for HDMI 1.3 must be capable of accepting the timings, resolutions
and audio formats of the display that is connected to HDMI output port 1. It is
recommended that the display with the lowest native resolution be connected
to HDMI output port 1. This is to ensure that a compatible video signal will
be able to be displayed on all connected monitors. There is a generic EDID
programmed into the 2x4 Switcher for HDMI 1.3 that can be used instead. See
page 11 for more details.