Filter
Top Products
8
CONNECTING AND OPERATING THE USB-400FON EXTENDER
Connecting the USB 400 FO Extender
1. Connect the included USB cable between USB port on the host computer
and the Sender Unit.
2. Connect two (2) LC-fi ber cables between the Sender Unit and the Receiver
Unit.
3. Connect the USB devices to the Receiver Unit.
IMPORTANT: The Sender Unit must be powered before the Receiver Unit.
4. Connect the power supply to the Sender Unit and connect the power cord to
an available electrical outlet.
5. Connect the power supply to the Receiver Unit and connect the power cord
to an available electrical outlet.
Wiring Diagram for the USB 400 FO Extender
EXT-USB-400FON
Sender
Computer
Receiver
USB Peripheral
en
der
R
eceive
r
USB Peripheral
USB Peripheral
USB Peripheral
(Up to 1640 ft.)
FIBER OPTIC LC-LC CABLE
USB CABLE