Filter
Top Products
13
IR REMOTE DESCRIPTION
RMT-16416IR
Remote Control Unit
1 Activity Indicator
This LED will be activated momentarily each time a button is pressed.
2 Display and Source Selection Buttons (1 - 16)
These buttons are used to select which source is routed to a monitor.
Routing sources using the Remote Control unit
Issuing a routing command is a two step process. The fi rst step is to select the
monitor (1-16) to which the source will be routed. The second step is to select the
source (1-16).
Example:
Route the source device connected to In 6 to the monitor connected to Out 4.
1. Press button 4 (Out 4) on the IR remote control unit.
2. Press button 6 (In 6) on the IR remote control unit.
The source connected to In 6 will be routed to the monitor connected to Out 4.
1
2