Filter
Top Products
14
RS-232 SERIAL CONTROL
S Command
The S command displays the current routing status of the Switcher. The S com-
mand will also display the current auto-switching status (A or N). Please see the
examples below the syntax description.
Syntax:
s
Parameters:
None
Examples:
s
2A
In the fi rst example above, 2A indicates that Input 2 is selected and Auto
Switching Mode is active.
s
3N
In the second example above, 3N indicates that Input 3 is selected and Auto
Switching Mode is not active.
V Command
The V command returns the fi rmware version.
Syntax:
v
Parameters:
None