Filter
Top Products
5
PANEL DESCRIPTIONS
1 IR Sensor
Receives signals from the IR Remote Control.
2 Power Indicator
This LED will turn bright red once the locking power supply has been properly
connected.
3 Input Indicators (HDMI In 1 - HDMI In 4)
Displays the current input of the 4x1 Switcher.
4 Enhance Indicator
This LED indicates that EQ (Pre-Emphasis) is active.
5 RS-232 Serial Port (Output)
Connects to the RS-232 control device. The 4x1 may be switched remotely
using this port. See page 12 for details.
6 EQ (Pre-Emphasis) Button
Use this button to improve the signal over long cable distances.
7 Select Button
Used to select the input source.
8 HDMI Output Port
Connect an HDTV display to this HDMI port.
9 HDMI Input Ports (4)
Connect a Hi-Def source to these ports.
10 5V DC Power Connector
Connects the included 5V DC power supply to this receptacle.