Filter
Top Products
- 27 - BIOS Setup
English
Power Management Setup
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1. (Default value)
S3(STR) Set ACPI suspend type to S3.
Soft-Off by PWR_BTTN
Off The user press the power button once, he can turn off the system.
(Default value)
Suspend The user press the power button once, then he can enter suspend mode.
System After AC Back
Laststate When AC-power back to the system, the system will return to the Last state
before AC-power off.
Off When AC-power back to the system, the system will be in "Off" state.
(Default value)
On When AC-power back to the system, the system will be in "On" state.
IRQ [3-7, 9-15], NMI
When IRQ [3-7, 9-15] or NMI triggered, the suspend timer will be reloaded to prevent system gets
into green mode.
Disabled Don't monitor IRQ [3-7, 9-15] or NMI.
Enabled Monitor IRQ [3-7, 9-15] or NMI. (Default value)
ModemRingOn
Disabled Disable Modem Ring on function.
Enabled Enable Modem Ring on function. (Default value)
PME Event Wake Up
Disabled Disable this function.
Enabled Enable PME as wake up event. (Default value)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type [S1(POS)]
Soft-Off by PWR_BTTN [Off]
System After AC Back [Off]
IRQ [3-7, 9-15], NMI [Enabled]
ModemRingOn [Enabled]
PME Event Wake Up [Enabled]
Power On by Keyboard [Disabled]
Power On by Mouse [Disabled]
Resume by Alarm [Disabled]
x Month Alarm NA
x Day (of Month) Everyday
x Time (hh:mm:ss) 0 : 0 : 0
Power LED in S1 state [Blinking]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults
Item Help
Menu Level`
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS