Filter
Top Products
36
GA-5YXS1-RH/GA-5YXS-RH Motherboard
Base I/O Address/IRQ
3F8/IRQ4 Set IO address to 3F8/IRQ4.
2F8/IRQ3 Set IO address to 2F8/IRQ3. (Default setting)
3E8/IRQ4 Set IO address to 3E8/IRQ4.
2E8/IRQ3 Set IO address to 2E8/IRQ3.
USB Controller
This item allows users to enable or disable the USB device by setting item to the desired
value.
Enabled Enable USB controller. (Default setting)
Disabled Disbale this function.
Legacy USB Support
This option allows user to function support for legacy USB.
Enabled Enables support for legacy USB. (Default setting)
Disabled Disables support for legacy USB.
Route Port 80h cycles to
Set route port 80h cycles to either PCI or LPC bus.
PCI Set Route Port 80h I/O cycles to the PCI bus. (Default setting)
LPC Set Route Port 80h I/O cycles to the LPC bus.
Serial ATA
Enabled Enables on-board serial ATA function. (Default setting)
Disabled Disables on-board serial ATA function.
Native Mode Operation
This option allows user to set the native mode for Serial ATA function.
Auto Auto detected. (Default setting)
Serial ATA Set Native mode to Serial ATA.
SATA RAID Enable
Enabled Set this item to enable and configure SATA RAID function.
Disabled Disabled this function. (Default setting)
SATA AHCI Enable
Enabled Set this item to enable SATA AHCI function for WinXP-SP1+IAA