Gigabyte GA-K8NF-9 Network Card User Manual


 
BIOS Setup- 43 -
English
2-7 MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
MB Intelligent Tweaker(M.I.T.)
HT Frequency ratio [Auto]
CPU Frequency [200]
K8 CPU Clock Ratio [Auto]
Current DDR speed 400
CPU Spread Spectrum [Center Spread]
PCIE Clock [100Mhz]
Robust Graphics Booster [Auto]
Chipset core PCI-E voltage [Normal]
HT-Link voltage control [Normal]
DDR voltage control [Normal]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`
HT Frequency Ratio
This setup option will automatically assign by CPU detection. (Default value: Auto)
CPU Frequency
200 ~ 456 Set CPU frequency from 200Mhz to 456Mhz.
K8 CPU Clock Ratio
This setup option will automatically assign by CPU detection. (Default value: Auto)
Current DDR speed
Display the current DDR speed.
CPU Spread Spectrum
Disabled Disable CPU Spread Spectrum.
Center Spread Set CPU Spread Spectrum to Center Spread. (Default value)
PCIE Clock
100Mhz ~ 150Mhz Set PCI-E clock from 100Mhz to 150Mhz.
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto Set Robust Graphics Booster to Auto. (Default value)
Fast Set Robust Graphics Booster to Fast.
Turbo Set Robust Graphics Booster to Turbo.
Incorrect using these features may cause your system broken. For power end-user use only.