Filter
Top Products
BIOS Setup
English
- 47 -
ACPI Suspend Type
S1(POS) Set suspend type to Power On Suspend under ACPI OS(Power On Suspend).
(Default value)
S3(STR) Set suspend type to Suspend To RAM under ACPI OS (Suspend To RAM).
Soft-Off by PWR_BTTN
Off Press power button to power off system instantly. (Default value)
Suspend Press power button 4 sec. to power off system. System will enter suspend
if the button is pressed less than 4 sec.
Power Management Setup
Figure 5: Power Management Setup
ACPI Suspend Type [S1(POS)]
Soft-Off by PWR_BTTN [Off]
System After AC Back [Off]
IRQ [3-7, 9-15], NMI [Enabled]
ModemRingOn [Enabled]
PME Event Wake Up [Enabled]
x USB Device Wake-Up From S3 Disabled
Power On by Keyboard [Disabled]
Power On by Mouse [Disabled]
Resume by Alarm [Disabled]
x Month Alarm NA
x Day (of Month) 0
x Time (hh:mm:ss) 0 : 0 : 0
Item Help
Menu Level
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults