Filter
Top Products
Introduction
English
- 9 -
On-Board LAN y Built-in RTL8100C (10/100 Mbit)
y 1 RJ45 port
On-Board Sound y ALC655 CODEC
y Supports Jack Sensing function
y Line Out / 2 front speaker
y Line In / 2 rear speaker (by s/w switch)
y Mic In / center & subwoofer (by s/w switch)
y SPDIF In / Out
y CD In / AUX In / Game Connector
On-Board SATA RAID y Onboard SiS 964
y 2 Serial ATA connectors in 150 MB/s operation mode
y Supports Disk striping (RAID0) or DISK Mirroring (RAID1)
y Up to 2 SATA devices
On-Board IEEE1394 y Built-in TSB43AB23
PS/2 Connector y PS/2 Keyboard interface and PS/2 Mouse interface
BIOS y Licensed AWARD BIOS
y Supports Q-Flash
Additional Features y PS/2 Keyboard password power on
y PS/2 Mouse power on
y STR(Suspend-To-RAM)
y AC Recovery
y USB KB/Mouse wake up from S3
y Poly fuse for keyboard over-current protection
y Supports Thermal Shutdown function
y Supports @BIOS
y Supports EasyTune 4
Overclocking y Over Clock (CPU/DDR/AGP/PCI) by BIOS
Please set the CPU host frequency in accordance with your processor's specifications.
We don't recommend you to set the system bus frequency over the CPU's specification because
these specific bus frequencies are not the standard specifications for CPU, chipset and most of the
peripherals. Whether your system can run under these specific bus frequencies properly will
depend on your hardware configurations, including CPU, Chipsets, Memory, Cards…etc.