Filter
Top Products
GA-K8VT800 Motherboard - 42 -
English
2-7 Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Frequency/Voltage Control
K8 CPU Clock Ratio [Default]
Auto Detect DIMM/PCI Clk [Enabled]
Spread Spectrum [Enabled]
CPU Clock [200MHz]
CPU OverVoltage Control [Auto]
AGP OverVoltage Control [Auto]
DIMM OverVoltage Control [Auto]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
K8 CPU Clock Ratio
Default Set CPU clock ratio to default. (Default value)
x4 800MHz~x10 2000MHz Set CPU clock ratio from x4 800MHz to x10 2000MHz.
Auto Detect DIMM/PCI clk
Enabled Detect the DIMM/PCI clock automatically. (Default value)
Disabled Disable this function.
Spread Spectrum
Enabled Enable clock spread spectrum. (Default value)
Disabled Disable this function.
CPU Clock
200MHz ~ 255MHz Set CPU Host Clock from 200MHz to 255MHz.
Incorrectly using this function may damage your system. For power users only.
CPU OverVoltage Control
Auto Set CPU voltage as CPU required. (Default value)
+5% Increase CPU voltage by 5%.
+7.5% Increase CPU voltage by 7.5%.
+10% Increase CPU voltage by 10%.
Warning: CPU may be damaged or CPU life-cycle may be reduced when CPU is over-voltage.
AGP OverVoltage Control
Auto Set AGP voltage as AGP required. (Default value)
+0.1v Increase AGP voltage +0.1V.
+0.2v Increase AGP voltage +0.2V.
Incorrect using these features may cause your system broken. For power end-user use only.