Filter
Top Products
BIOS Setup- 35 -
English
2-3 Integrated Peripherals
IDE DMA transfer access
Enabled Enable IDE DMA transfer access. (Default value)
Disabled Disable this function.
OnChip IDE Channel0
Enabled Enable onboard 1st channel IDE port.(Default value)
Disabled Disable onboard 1st channel IDE port.
OnChip IDE Channel1
Enabled Enable onboard 2nd channel IDE port.(Default value)
Disabled Disable onboard 2nd channel IDE port.
OnChip Serial ATA
Enabled Enable VT8237R / VT8237R+ Serial ATA support.(Default value)
Disabled Disable this function.
SATA Mode
RAID Set onboard SATA mode to RAID.(Default value)
IDE Set onboard SATA mode to IDE.
AC97 Audio
Auto Autodetect onboard AC'97 audio function. (Default value)
Disabled Disable this function.
USB 1.1 Controller
Disabled Disable USB 1.1 controller.
Enabled Enable USB 1.1 controller. (Default value)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
IDE DMA transfer access [Enabled]
OnChip IDE Channel 0 [Enabled]
OnChip IDE Channel 1 [Enabled]
OnChip Serial ATA [Enabled]
SATA Mode [RAID]
AC97 Audio [Auto]
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Onboard H/W LAN [Enabled]
OnBoard LAN Boot ROM [Disabled]
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
UART Mode Select [Normal]
x UR2 Duplex Mode Half
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
Midi Port Address [Disabled]
x Midi Port IRQ 10
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`