Filter
Top Products
GN-FE605(M) PCI Adapter User’s Guide
37
SNMP service operation
Install SNMP service in Windows 2000/XP
In Microsoft windows 2000 and XP, SNMP service installation procedure is
listed as the following:
1. Click Start, point to Settings, click Control Panel, double-click
Add/Remove Programs, and then click Add/Remove Windows
Components.
2. In Components, click Management and Monitoring Tools (but do not
select or clear its check box), and then click Details.
3. Select Simple Network Management Protocol check box, and click OK.
4. Click Next to do the installation.
Note:
1. You must be logged on as an administrator or a member of the
Administrators group in order to complete this procedure. If your computer
is connected to a network, network policy settings might also prevent you
from completing this procedure.
2. SNMP starts automatically after installation.
Install SNMP service in Windows 98
In Microsoft windows and 98, SNMP service installation procedure is listed as
the following:
1. Click Start, point to Settings, click Control Panel, double-click Network,
and then click Add.
2. In the select Network Components Type dialog box, double click Service.
3. In the select Network Service dialog box, click Have Disk.
4. In the Install From Disk dialog box, type the path to the
\TOOLS\RESKIT\NETADMIN\SNMP directory on the windows 98
compact disc, and then click OK.
5. In the select Network Service dialog box, select Microsoft SNMP agent
from the Models list, and then click OK.