Filter
Top Products
INTERFACE
PRINT
INTERVAL
SERIAL:
This sets the printer for data transmission via serial
interface.
EMUL.EPS.LQ580 ESC/P2:
This sets the printer for data transmission via EPSON
LQ580 ESC/P2 protocol.
EMUL.TALLY T2024:
This sets the printer for data transmission via TALLY T2024
protocol.
It is possible to print graphics, such as bmp-, jpg- or tif-,
directly from WINDOWS
®
programs.
Set the printer INTERFACE of EMUL.EPS.LQ580 ESC/P2
or EMUL.TALLY T2024. Use a 24-pin type WINDOWS
®
printer. The following configurations have been verified:
INTERFACE: EMUL.EPS.LQ580 ESC/P2
WINDOWS® printer driver: Epson Compatible 24 PIN and
Epson LQ560
Details:
If the width of the graphic exceeds the paper print width,
then the excess is discarded. It is recommended to use the
auto-sizing print option in WiNDOWS® programs, where
possible.
The printing of measuring values can be carried out under
internal timer control.
Setting range: 10 s ... 24 h in steps of 10 s.
The interval of starts after the printing of the line received
last.
For more information see chapter 7.3. „Handshake
Messages“ !
Print graphics
directly from
WINDOWS
®
25
BAUDRATE
6.2. Serial Interfaces
There areten options available:
110; 150; 300; 600; 1200; 2400; 4800; 9600; 19200 and
38400 baud.