Filter
Top Products
GOSSEN METRAWATT GMBH 26
4.1.2 Unit of the temperature parameters
The unit of the temperature parameters depends upon
– the range marking B1 ... B5 of the equipment (see PI = 33h),
– the configured sensor type (see PI = 33h) and
– the configured unit of the sensor (see PI = 32h).
With standard signal (B2, B5) and Pt100 with 0.1° display, the decimal point only serves for the display on the R26900/01, not for the parameter val-
ues. That is, a value of 234.5 in the display, for example, is to be transmitted as 2345 = 0929. The two characters of the data block then are 29h, 09h.
Marking
Sensor type
0 ... 7 8
B1, B3, B4 1°C / 1°F 0.1°C / 0.1°F
B2, B5 1, 0.1, 0.01, 0.001