Filter
Top Products
8/16-Port PS/2 KVM Switch
12 / 26
5.3 OSD Main Screen Headings
indicates the computer is powered on at selected port
indicates the computer attached at this port has password
protected. All ports at factory default do not have password
assigned, therefore no icon present
USER1~8
Port name of corresponding port number. USER 1~8
illustrated as factory default setting.
indicates the PC port is set for Auto Scan Mode. At factory
default all PC port is active for Auto Scan.
S
Every time switching is made PS/2 KVM beeps for
notification. Please press Scroll Lock twice followed by “S” to
turn beeper on or off
_
to select 1~8 computer Ports (1~8 PC Port)
+
to select A~H computer port (9~16 PC Port)
R
to set factory default. ( ★NOTE: password will not be erased
after this operation)
↑
Select computer at previous port
↓
Select computer at next port
PgUp Select previous bank
PgDn Select next bank
1 1 Left hand side ”1” indicates current active port, right hand
side “1” indicates current active bank.
F1 Edit computer name
F2 Password setting
F3 Select scan port
F4 Auto scan mode
F5 Hot key setting
ESC Exit OSD
SCAN RATE Scan rate
VERSION Firmware version