Grundig HMS470 Computer Hardware User Manual


  Open as PDF
of 18
 
- 9 -
5 Programming
5.1 Preparation
•ConnectthetestreceivertotheHFoutputonthemodulatormodule.
•Adjustthetestreceivertotheoutputchannelofthechannelstriptobeset.
•Switchonthemodulatorifnecessary.Foreachmodulator,thereisagreen
LED which indicates if the modulator is switched on.
The process of programming the HMM 470 and HMS 470 modules is the
same, with one exception. The programming process for the HMM 470
module is described in section 5.3. Please see sections 5.4 and 5.3 to pro-
gramme the HMS 470 module.
LED – Channel strip “A“
LED – Channel strip “B“
LED – Channel strip “C“
LED – Channel strip “D“
 previous next