Filter
Top Products
Programming the Scanner
3-32
Condensed Data Editor
♦ Preamble, Postamble, Data Length & Symbol ID Trans. ♦
PROGRAM END(Exit)
Family Code Selection Parameter Selection Option Code
Preamble
None
1-15 characters (use hex value for each character)
Maximum 15-character input; scan “FIN” to terminate this selection.
FIN
[00-7F], [FIN]
Postamble
None
1-15 characters (use hex value for each character)
Maximum 15-character input; scan “FIN” to terminate this selection.
FIN
[00-7F], [FIN]
Data Length Transmission
Disable
Enable 2-digits data length transmission
If data length exceeds 99, 3-digit data length will be transmitted.
0
1
Code ID Transmission
Disable Code ID transmission
Enable prefix Code ID transmission
Enable suffix Code ID transmission
Enable both prefix and suffix Code ID transmission
0
1
2
3
Data Pass Control
Disable (format match required)
Enable (format match not required)
If data verifier is false, the original scanned bar code data will be transmitted.
0
1
The
Data Editor
is a very powerful, Artificial-Intelligence based data editing expert system provided specifically for the 3060B/3080B/3220 bar code scanners.
Through the
Data Editor
, you can process the scanned data prior to transmitting in many ways, such as:
Insert, Delete, Match, Verify, Replace, Reorganize
,
and
Repeat Transmission
. It also allows you to arrange the transmission of scanned data to any specific format.
Due to the resources used by this system, the
Full-feature Data Editor
is only supported by
HHP SET
. Through
HHP SET
, all settings and configurations can be
done on-screen, under Windows
®
95/98/NT environment.
A
Condensed Version Data Editor
is provided here in the manual and is utilized by scanning the programming bar codes.
When Data Pass Control is disabled, all input data must conform to an edited format or the scanner does not transmit the input data to the host.