Filter
Top Products
3800/3900 User’s Guide 6 - 3
Non Decoded Laser Emulation Idle
The idle describes the state of the scanner when no data is being transmitted.
When in Non Decoded mode, you must set the scanner’s idle state to match the
idle state for the device to which the scanner is connected. Default = High.
Disabling the Secondary Interface
You can temporarily disable the secondary interface, but still retain the
secondary interface settings in the scanner’s memory by scanning the Disable
bar code below. To re-enable the secondary interface, scan the Enable bar
code. Default =Disable.
Secondary Trigger Mode
Manual Trigger:
You must press the scanner trigger to scan. When not
scanning, idle power is maintained. Default = Manual Trigger.
Low
* High
* Disable
Enable
* Manual Trigger