Filter
Top Products
Document Reader Imaging Guide 2 - 3
Menu Commands
The following chart lists the settings for each of the serial default commands. The factory default setting is indicated by an
asterisk (*).
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
For full description,
see page
Imaging Default Commands
Default all Imaging Commands IMGDFT 1-1
Image Snap (IMGSNP)
Imaging Style - Decoding SNPSTY0 1-1
*Imaging Style - Photo SNPSTY1 1-1
Imaging Style - Manual SNPSTY2 1-1
Beeper On SNPBEP1 1-1
*Beeper Off SNPBEP0 1-1
Aimer Lines On SNPAIM1 1-2
*Aimer Lines Off SNPAIM0 1-2
Exposure (1-7874 microseconds) SNPEXP 1-2
*Gain - None SNPGAN1 1-3
Gain - Medium SNPGAN2 1-3
Gain - Heavy SNPGAN4 1-3
Gain - Maximum SNPGAN8 1-3
Delta for Acceptance (0-255) *25 SNPDEL### 1-3
*LED State - Off SNPLED0 1-2
LED State - On SNPLED1 1-2
*Wait for Trigger Off SNPTRG0 1-2
Wait for Trigger On SNPTRG1 1-2
Update Tries (0-10) *6 SNPTRY## 1-3
Target White Value (0-255) *125 SNPWHT### 1-3
Target Set Point Percentage (1-99) *97 SNPPCT## 1-4
Image Ship (IMGSHP)
*Infinity Filter - Off IMGINF0 1-6
Infinity Filter - On IMGINF1 1-6
*Compensation Off IMGCOR0 1-6
Compensation On IMGCOR1 1-6
*Pixel Depth - 8 bits/pixel (grayscale) IMGBPP8 1-6
Pixel Depth - 1 bit/pixel (B&W) IMGBPP1 1-6
*Don’t Sharpen Edges IMGEDG0 1-7
Sharpen Edges (0-23) IMGEDG## 1-7
*File Format - JPEG IMGFMT6 1-7
File Format - KIM IMGFMT0 1-7
File Format - TIFF binary IMGFMT1 1-7
File Format - TIFF binary group 4, compressed IMGFMT2 1-7
File Format - TIFF grayscale IMGFMT3 1-7
File Format - Uncompressed binary IMGFMT4 1-7
File Format - Uncompressed grayscale IMGFMT5 1-7
File Format - BMP IMGFMT8 1-7
*Histogram Stretch Off IMGHIS0 1-7
Histogram Stretch On IMGHIS1 1-7