Filter
Top Products
Dolphin® 9500 Series Mobile Computer Quick Start Guide 5
Terminals are shipped with both batteries completely discharged. Charge the
main battery pack for a minimum of four hours before initial use in the
terminal!
For charging, use a Dolphin 9500 Series peripheral and the power cables provided by
Hand Held Products. Use of peripherals or cables not sold/manufactured by Hand Held
Products will void the warranty and may damage the terminal.
Step 3: Initialize the Dolphin Terminal
Note: Do NOT press any keys while the terminal is initializing!
1. Apply power to the Dolphin terminal. The screen turns white and the LEDs
flash as the system performs a hard reset.
2. The kernel splash screen displays for a few seconds. The Build numbers
indicate software version numbers for the operating system.
3. When the Windows Mobile splash screen appears, follow the on-screen
directions using the stylus provided by Hand Held Products.
Note: When aligning the screen, press firmly into the center of the cross-hair
target once and release. Do not “double-tap” the target. Alignment should
always be performed with a stylus designed for touch screen
applications. The small point is required for accurate calibration.
4. Wait as Autoinstall begins installing programs. A status bar appears on the
screen that identifies each program as it installs.
Do NOT touch the screen or the keyboard while programs are installing!
5. When Autoinstall is complete, the screen turns white and the LEDs flash as
the terminal performs a soft reset.
6. The kernel splash screen appears again for a few seconds.
7. When initialization is complete, the Today screen appears.
!
9.XX/9.XX/9.XX/9.XX
KeyboardBootloader
Kernel
Initial
Program
Loader (IPL)