Filter
Top Products
Quick Start
H3C S3100-SI Series Ethernet Switches
Chapter 3 Installation
3-15
RJ-45 Signal Direction DB-9
7 DSR → 6
8 CTS → 8
3.5.2 Connecting Console Cable
Follow these steps to connect a terminal device, a PC for
example, to the switch:
Step 1: Connect the DB-9 female connector of the Console cable
to the serial port of the PC or the terminal device used to configure the
switch.
Step 2: Connect the RJ-45 connector of the Console cable to the
Console port of the switch.
Caution:
Identify the label of the port before connecting a connector.