Hanns.G HW191 Computer Monitor User Manual


 
User’s Manual
H-POSITION
Select the H-POSITIONoption to shift the screen image to the
left or right. Enter the option and adjust the level. [For VGA
only]
V-POSITION
Select the V-POSITIONoption to shift the screen image up or
down. Enter the option and adjust the level. [For VGA only]
CLOCK
Select the CLOCKoption to reduce the vertical flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
PHASE
Select thePHASEoption to reduce the horizontal flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
SHARPNESS
Select theSHARPNESSoption to adjust the sharpness of the
display. Set the value from -2 to 2.
HDMI MODE
Transferring audio-video image by HDMI port would
cause edges of the image being cut on the screen; selectPC
Modeto display in full screen. Enter the option and select
VIDEO Mode(VIDEO) or PC Mode(PC). [For HDMI
Input only]
RESPONSE TIME
Setup the display response time through the Response time
function. Available settings are MINIMUM,
INTERMEDIATE, and MAXIMUM. [This feature is limited to
specific models only.]
OSD SETTING
LANGUAGE
Select LANGUAGE option to change the language of the
OSD. Enter the option and select a language. [Reference only,
the OSD Language depends on the selected model]
H-POSITION
Select H-POSITIONoption to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
V-POSITION
Select V-POSITIONoption to adjust the vertical position of
the OSD. Enter the option and adjust the level.
TRANSPARENCY
Select TRANSPARENCYoption to adjust the transparency of
the OSD. Enter the option and adjust the level.
OSD TIME-OUT
Select OSD TIME-OUToption to set the OSD time out from
10 to 100 seconds. Enter the option and adjust the level.
OSD COLOR To choose the color combination of the OSD window, select
15