Hanns.G HW191 Computer Monitor User Manual


 
User’s Manual
OSD COLORoption under OSD SETTINGmenu, choose
modes 1/2/3.
SYSTEM
AUDIO INPUT
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connected to monitor’s LINE IN (or
AUDIO IN) port. [For HDMI Input only]
VOLUME
Select the VOLUMEoption to change the volume level. Enter
the option and adjust the level. [By high volume, risk of hearing
damage exists]
MUTE
Select theMUTEoption to switch the function On or Off.
DDC/CI
Select the DDC/CIoption to switch the function On or Off.
[Dual input mode optional]
FACTORY RESET
Select the FACTORY RESEToption to reset to the monitor’s
default setting. This will erase the current settings. Enter the
option and select On or Off.
INFORMATION
Display Horizontal frequency/Vertical frequency/Resolution
information.
16