Filter
Top Products
Page 2SKU 45146 For technical questions, please call 1-800-444-3353.
MODEL # 45146 MASKING STATION SPECIFICATIONS
PRODUCT FEATURES
1. This cart provides a convenient, movable storage and work unit for masking paper
and tape.
2. Hold two rolls of paper and 4 rolls of tape for convenient dispensing of masking
materials.
3. Strong steel construction promises long service life.
4. Sturdy plastic wheels aid mobility, built-in trays and towel rack offer convenient
features.
5. Large tray stores extra rolls of tape, cleaning towels, cleaner and other materials.
6. Small tray conveniently holds trimming knives and other tools.
7. Towel rack holds and stores wiping towels.
USING THIS PRODUCT
This masking station will hold two rolls of masking paper, with two rolls of tape for each roll.
By aligning the tape with the edge of the paper, and threading the materials through each
cutter blade, it is possible to dispense and cut off a preassembled section of masking paper
with tape along two edges. This makes it very convenient to mask objects such as vehicles
and equipment prior to painting or other treatment.
SAVE THIS MANUAL
You will need this manual for the safety warnings and cautions, assembly instructions,
operating procedures, maintenance procedures, trouble shooting, parts list, and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep both this manual and your invoice in a safe, dry place for future reference.
WARNING
Do not overload this masking station.
Do not unbalance the weight load of materials stored on this station.
Use caution in working with the cutter blades, they are very sharp.
NOTICE
The Warnings, Cautions, and Instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
Construction: Formed Stamped Sheet
Steel w/ Welded Tubular Steel
Axle Holder: 20-1/8” L x 7/8” Thick
Cart: 29”L x 25”W x 36”
Tubular: 1” Thick
Wheel: 8-1/4” Dia. x 1”W (Tire)
Wheel Support: Axle w/Two Hex Center Lock Cap
Blade: 22-1/16”L x 2-7/8”W