Filter
Top Products
KK-K9-D22-K_INST_9-07
5. Mount Aluminum Step sills
• Center floor inside vehicle.
• Front edge of floor will line up with front edge of step sill. Top of Step sill will mold to curve
of trim.
• Pre-drill and attach using #10 x ½” Stainless sheet metal screws.
6. Front and Rear Mounting Brackets.
• Lower “B” pillar trim will need to be partially removed
to allow for mounting to metal behind trim.
• Loosely attach 2-pcs front mounting brackets to front
cage using ¼-20 x ¾” carriage bolts and serrated nuts.
• Mark and pre-drill where mounting bracket comes into
contact with “B” pillar support.
• Attach to metal “B” pillar support using ¼” x ¾” Hex
head lag bolts.
• Trim will have to be notch to accept bracket.
• Tighten all hardware on front and rear cage mounting
brackets.
Step Sill
Front Cage Mounting Brackets