Filter
Top Products
- 6 -
box. If you want to change the settings in order to perform more advanced
configuration or even change the mode of operation, you can use the
web-based utility provided by the manufacturer as described in the following
sections or use the Software-based Setup Wizard in the included CD-Rom.
WPA AP -Configuration via Web
Login
1. Open the browser, enter the local port IP address of the Device
(default at 192.168.1. 240), and click “Go” to get the login page.
2. The user name and password are not required and should be left blank
for the first-time login. Just click OK to enter.