Filter
Top Products
- 21 -
To upgrade system firmware,
1. You will have to download the file to your computer.
2. Enter the file name and path in the field next to the Browse button. Or
you can click Browse to find the file you previously downloaded.
3. Click the Upload button to start upgrading. Wait for about 1 minute
for the upgrade.
4. When the firmware upgrade is complete, remember to reboot the
device.
5. If you want to change the operation mode, remember the default IP
address for WAP Access Point is 192.168.1.240, while for Bridge
mode it is 192.168.1.241.