Filter
Top Products
3 Connecting to a Windows NT Server 3.51
Windows 95 SR2
Windows 95 SR2 Requirements
• HP Vectra with Windows 95 SR2.
• IBM AUTO LANStreamer PCI card and drivers disk
Driver Name: W95setup.inf Size: 40KB Date: 9/17/96
• Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
• I/O Base Address FC00h
• Interrupt Request Level 9
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2 Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer
PCI Diagnostic Disk) and power on the machine.
3 After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4 Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5 When Windows 95 restarts a message will appear that new hardware has
been found.
6 Insert disk , 4 of 6, IBM Auto LANStreamer driver diskette.
7 Click the “Next” button to begin hardware wizard.
8 Click on “Other Locations” in the “Update Device Driver Location” dialog
box, and set path to “A:\WIN95” then click “OK” (If you have an HP pre-
loaded HDD, set the path statement to
“C:\LANDRV\LNSTRM\DISK4\WIN95\”).
9 “IBM Auto LANStreamer PCI Adapter(NDIS3)” should now be listed.
Click on “Finish.”
10 When prompted to insert the disk labeled “IBM Streamer Family Adapter
Option Diskette”, click “OK.”