HP (Hewlett-Packard) 1015 Printer User Manual


 
58 Chapter 6 ENWW
Finding the solution
You can use this section to find the solution to common printer problems.
Step 1: Is the printer set up correctly?
Is the printer plugged into a power outlet that is known to work?
Is the on/off switch in the on position?
Is the print cartridge properly installed? See Changing the print cartridge.
Is paper properly loaded in the input tray? See
Loading media
.
Yes: If you answered yes to the questions above, go to Step 2: Is the Ready light on?
No: If the printer will not turn on, Contact HP support.
Step 2: Is the Ready light on?
Do the control panel lights look like this picture?
Yes:Go to Step 3: Can you print a demo page?
No: If the control panel lights do not look like the picture above, see Status light patterns.
If you are unable to resolve the problem, Contact HP support
.
Step 3: Can you print a demo page?
Press the Go button to print a demo page.
Yes: If the demo page printed, go to Step 4: Is the print quality acceptable?
No: If no paper came out, see Media handling problems.
If you are unable to resolve the problem, Contact HP support
.