Filter
Top Products
Service access cover
Description Spare part number
Charcoal 650727-001
Crimson Red 650732-001
Luminous Rose 650731-001
Ocean Drive 650728-001
Sweet Purple 654203-001
Before removing the service access cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 37).
Remove the service access cover:
1. Slide the battery/service access cover latch (1) to release the service access cover.
2. Slide the service access cover toward the front of the computer (2) and then remove the cover
(3).
NOTE: It is normal for the service access cover to flex slightly when it is released. You may
also hear some popping noises as the service access cover tabs disengage from the base
enclosure slots.
38 Chapter 4 Removal and replacement procedures