Filter
Top Products
Specifications
C-2 HP Uninterruptible Power System R1500 XR Models User Guide
Input Specifications
Table C-2: Input Specifications
UPS Model
Utility Voltage
Frequency (Hz)
Default
Settings
Nominal
Voltage
(VAC)
Available
Settings
Utility Voltage
(VAC)
Power Cord
Supplied
R1500 XR NA 50/60 120 110, 120, 127
1
Non-detachable
power cord with
NEMA 5-15 plug
R1500 XR JPN 50/60 100 100
2
Non-detachable
power cord with
NEMA 5-20 plug
R1500 XR H INT’L 50/60 230 220, 230, 240 Input power
receptacle
(IEC-320-C14) for
country-specific plug
attachment
Note:
1
120 on battery
2
110 on battery
Before connecting devices, verify that the UPS will not overload by checking that the rating
of the devices does not exceed the capacity of the UPS. Evenly distribute connected devices
throughout all load segments. Do not exceed the rating of individual receptacles. Connect
devices according to shutdown preference.
After checking that the UPS will not overload, connect the power cords from the devices to
the appropriate output receptacles of the UPS.
WARNING: To prevent risk of personal injury from electric shock, the
UPS R1500 XR H INT’L model is not suitable for installation where the total earth
(ground) conductor leakage current for all connected devices exceeds 3.5 mA. Use
RackBuilder Pro (obtainable at www.hp.com) to find the total system leakage current.