Filter
Top Products
Canadian Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
EquipmentRegulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matérielbrouilleur du Canada.
Japanese Notice
Korean Notice
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the
monitor to operate on input voltages between 100–120V or 200–240V.The power cord set (flexible
cord or wall plug) received with the monitor meets the requirements for use in the country where you
purchased the equipment. If you need to obtain a power cord for a different country, you should
purchase a power cord that is approved for use in that country. The power cord must be rated for the
product and for the voltage and current marked on the product's electrical ratings label. The voltage
and current rating of the cord should be greater than the voltage andcurrent rating marked on the
product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm² or 18 AWG,
and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m).If you have questions
about the type of power cord to use, contact an authorized HP service provider. A power cord should
be routed so that it is not likely to be walked on or pinched by items placed uponit or against it.
Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from
the product.
Japanese Power Cord Requirements
For use in Japan, use only the power cord received with this product.
CAUTION: Do not use the power cord received with this product on any other products.