Filter
Top Products
Network Cabling Method
In this method, the client PC is connected to the iLO using a hub/switch and the
network connections of the diagnostic station. The iLO default configuration enables
the server blade to obtain its IP address from a DHCP server.
NOTE: If you have edited the configuration to use a static IP address, iLO uses this same
static IP address when you connect with the network cabling method.
Connection Information and Browser Compatibility
To access iLO, you need some basic connection information:
• The TCP/IP address or DNS/WINS name of the iLO
— When using the direct cabling method, use the 192.168.1.1 for the TCP/IP
address and 255.255.255.0 for the subnet mask.
— When using the network cabling method, look on the iLO Default Network
Settings tag for first time access.
• A valid user ID and password with appropriate iLO privileges for accessing
Remote Console
This information is also available on the iLO Default Network Settings tag for
initial access information.
Be sure that the IP address and subnet mask of the client PC are compatible with the
IP address and subnet mask of the iLO diagnostic port. In addition, be sure that the
browser bypasses any proxy servers for the IP address or DNS/WINS name of the
iLO.
HP ProLiant BL p-Class System Diagnostic Station User Guide 31